PJRC.COM Offline Archive, February 07, 2004
Visit this page on the live site

skip navigational linksPJRC
Shopping Cart Checkout Shipping Cost Download Website
Home MP3 Player 8051 Tools All Projects PJRC Store Site Map
You are here: Printed Circuit Boards Introduction Search PJRC

Printed Circuit Boards
selected Introduction
Layout Artwork
Consumables

Making Printed Circuit Boards

As an electronics hobbiest, I've been making printed circuit boards for many years. I use a simple process which is relatively inexpensive to set up and yields boards of reasonable quality. This process is only practical for making a very low volume of printed circuit boards, such as an occasional prototype. Keeping the limitations of the process in mind, maybe this information will be useful.

I've been intending to write these web pages, with nice photos, for a year years now... maybe someday I'll actually do it. Fortunately, Injectorall has written a pretty nice page that describes how to do it. Their instructions are more or less similar to how I do it.

Process Steps

  1. Print layout artwork
  2. Apply photoresist to the board
  3. Expose photoresist
  4. Develop
  5. Etch
  6. Drill
  7. Tin Plate

Acquiring Materials


Making Simple Low-Volume Printed Circuit Boards, Paul Stoffregen
http://www.pjrc.com/tech/pc-boards/index.html
Last updated: November 28, 2003
Status: just starting these pc board pages
Suggestions, comments, questions?? <paul@pjrc.com>